• Durable construction


• Case may be grounded separately


• 5% Inductance substitution from 10ìH to 111.1mH

• Easy to use menu driven operation


• Internal or External Triggering


• Auto or Manual setup for horizontal and vertical scaling

• Easy to use menu driven operation


• Internal or External Triggering


• Auto or Manual setup for horizontal and vertical scaling

• True Power, Aparent Power, Reactive Power, Horsepower, Power factor, Phase Angle with Lead/Lag indicator
  
• AC+DC µA Current with 10nA resolution for flame rod tests
  
• 9999 count LCD
  
• Type K Temperature measurement

Compact, Battery Operated Device For Analyzing AC Power Loads - With PC Interface Plus Datalogging

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Sampling (update) rate is 2.5 times/second

Compact, battery operated device for analyzing AC/DC power loads — with PC interface plus datalogging

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation

Enables non-contact measurements of ground conductors without need for auxiliary ground spikes

• Measure Earth Resistance in three ranges (20/200/2000Ù)
• 2mA (800Hz) Test Current and Frequency
• 0 to 200VAC (40 to 500Hz) AC Earth Voltage/Frequency Auto Power Off and 3 minute Timer
• Overload Protection

Enables Non-Contact Measurements Of Ground Conductors Without Need For Auxiliary Ground Spikes

• Autoranging ground resistance easurements from 0.025Ù to 1500Ù with 0.002Ù resolution
• True RMS AC Leakage current range of 0.2mA to 30A with 1.000mA resolution
• Programmable Datalogging with 116 data points
• Programmable Hi/Lo Alarm
• 0.9" (23mm) Jaw size for large ground rods

Measure Electromagnetic Field Radiation Levels from Fans, Electrical Appliances, Wiring, and Power Lines

• Large 1/2" LCD (1999 count) display of Electromagnetic Field (EMF) level in milliGauss or microTesla
• Accurate measurements to 4% over a measuring range of 0.1 to 199.9mGauss (0.01 to 19.99µTesla)
• ELF frequency bandwidth of 30 to 300Hz
• Single axis - sampling 2.5 times per second

Checks Battery Condition In Seconds While The Battery Is In Service

• On-line testing without shutting down battery
• Built-in datalogger stores up to 999 tests
• Simultaneously measures battery resistance and voltage
• Windows® 95/98/NT/2000/ME/XP compatible software for downloading readings to a PC