AC Line Splitter Allows Clamp Meter to Measure AC Current on a 2-Wire or 3-Wire Power Cord to 15A

• Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
• Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
• Also features voltage check function

Measures Inductance, Capacitance, and Resistance with secondary parameter (Q,D,R)

• Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance)
• Set Hi/Lo limits using absolute values or percentage limits
• Parallel or Series equivalent circuit
• Automatic blown fuse indication
• Built-in test fixture or use external test leads

• Functions include Phase, AC/DC Voltage, Capacitance, Resistance, Frequency, Temperature, Continuity and Diode Phase indicator identifies clockwise or counter-clockwise wiring configuration via direction of arrow on display


• Type K temperature measurements to 752°F (400°C)

Compact, Battery Operated Device For Analyzing AC Power Loads - With PC Interface Plus Datalogging

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation
• Sampling (update) rate is 2.5 times/second

Compact, battery operated device for analyzing AC/DC power loads — with PC interface plus datalogging

• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer
• Max, Data Hold and Overload Protection
• Battery or AC adaptor provides line isolation

Measures Watts, Current, And Voltage

• Large LCD with 40 segment analog bargraph
• Data Hold, Max/Min recall, Auto Zero (DC current), plus low battery indication

Clamp On Measurements Of Leakage/Ground Currents

• 4000 count display provides high 10µA resolution with fast bargraph (20/sec)
• Shielded transformer jaw minimizes the effect of stray magnetic fields
• Selectable 50/60Hz filter circuit to eliminate high frequency noise and harmonics
• Min/Max and Zero function
• Data Hold

Measurements Include Resistance, Capacitance, and Frequency

• Phase rotation function identifies phase sequence for 3 phase motor installations
• Wide Capacitance and Frequency ranges
• Large display with 40 segment bargraph
• Min/Max record/recall

Datalogs Up To 4000 Readings 1000A

• Clamp measures 1f or 3f (phase) power to 600kW
• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
• Data Hold and Auto Power Off
• 25 point memory viewable on display
• Full function display on large 4-digit LCD with fast 40 seg. bargraph, Peak Hold, MIN/MAX

Measures, Computes, and Displays 3-Phase Power on Balanced or Unbalanced Loads

• Display Lead/Lag Current/Voltage phase shift in degrees
• Store/recall last 5 readings
• DC Current Auto-Zero
• Dual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
• Advanced Relative and Min/Max functions