Best Value Paperless Chart Recorder In the Market That's Easy to Set-Up and Operate

• Simultaneous numerical and graphical display of Humidity and Temperature readings
  • Plus Time and Date
• Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F)
  • Plus calculates Dew Point
• Basic accuracy 3%RH, 1.8°F/1°C
• Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution
• Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis - cbale and software included
• LCD indicates percentage of memory remaining

Humidity, Air Temperature Plus IR for Non-Contact Temperature Measurements

• Combination Humidity meter plus InfraRed Thermometer features a super large backlit dual display
• Primary and Secondary displays
  • Primary display is user selectable for IR or Humidity
  • Secondary always displays ambient temperature
• InfraRed thermometer has built-in laser pointer and an 8:1 distance to target ratio
• Auto power off Data Hold and MAX

Highest 2% RH Accuracy Precision Psychrometer

• Fast response time (<30 seconds)
• Dual backlit display
• Simultaneous display of:
  • Humidity/Temperature
  • Humidity/Dew Point
  • Humidity/Wet Bulb
• Data Hold and Min/Max functions

• Programmable Alarm warns of High Humidity Conditions
• %RH audible and visual alarm alerts when humidity exceeds set limit
• Displays Dew Point temperature
• Max/Min with reset function
• Humidity: 10 to 99%
• Temperature: 14 to 140°F (-10 to 60°C)
• Basic Accuracy: ±4%RH; ±1.8°F/1°C

• Programmable Alarm warns of High Humidity Conditions
• %RH audible and visual alarm alerts when humidity exceeds set limit
• Displays Dew Point temperature
• Rear calibration adjustment pot for Humidity and Temperature
• Probe clips onto meter or extends on 18" (457mm) cable
• Max/Min with reset function
• Humidity: 10 to 99%
• Temperature: 14 to 140°F (-10 to 60°C)
• Basic Accuracy: ±4%RH; ±1.8°F/1°C

Monitor moisture in wood and other building materials

• Dual Measurement Scale
• Wood Moisture from 6 to 44%
• Measures Building Material Moisture from 0.2 to 2.0%
• Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar

• Memory contains 8 wood groups with calibrations for approximately 170 species of wood


• Measurements can be taken using the integral pin electrodes (replaceable pins) or a heavy duty remote probe (included)


• Automatically temperature compensated (ATC) readings when used with the temperature probe (included)