Combination Rugged Flat-Surface pH Electrode with Autoranging High-Accuracy Conductivity Cell

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement

Exclusive Oyster™ Design Can Be Used In The Lab Or In The Field

• Large LCD built into adjustable “flip-up” cover displays pH or mV and Temperature simultaneously
• Neckstrap for “hands-free” operation
• Stores/recalls 25 labeled readings
• Min/Max; ATC or MTC
• Self diagnostics display codes
• 5 point buffer recognition (1.68, 4.00, 7.00, 10.00, 12.45) with adjustable buffer values

Rugged Design Conductivity Meter with 3 Ranges plus RS-232 PC Interface for Datalogging

• Manual or Automatic Temperature Compensation Calibration adjust for cell
• Large 1.4" (36mm) LCD display
• Min/Max/Avg, Data Hold, and Auto Power off
• Built-in RS-232 PC interface with optional Data Acquisition Software and Datalogger

One High-Accuracy Multi-Range Sensor Measures Four Parameters - Conductivity, TDS, Salinity and Temperature

• Autoranging meter offers 3 ranges to measure from pure water to salinity solution to waste, boiler and cooling water using the same conductivity cel
• 6 units of measure: µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
• Internal memory stores up to 15 labeled readings for easy recall
• Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0
• Self calibration on power up

Waterproof Meter Kit With One High-Accuracy Multi-Range Sensor That Measures Four Parameters

• Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution requiring a conductivity, TDS or Salinity measurements
• Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L
• High accuracy multi-range conductivity cell measures Conductivity, TDS, Salinity, and Temperature
• Automatic Temperature Compensation of 2% per °C
• Memory stores up to 15 labeled readings for easy recall
• Includes: EC400 Meter, 84,1413,12880uS/cm calibration standards, weighted base, sample cups with caps, batteries, neckstrap and case