AC Line Splitter Allows Clamp Meter to Measure AC Current on a 2-Wire or 3-Wire Power Cord to 15A

• Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
• Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
• Also features voltage check function

AC/DC Current Measurements

• 2.5" (64mm) clamp jaw
• Two ranges: 0 to 200A & 0 to 2000A
• DC zero adjust; Outputs 1mV/A
• 2% basic accuracy

Full Range MultiMeter Functions With High Resolution To 0.1ľA/0.1mV

• AC/DC Current via clamp with 0.1A resolution
• Large jaw size for high Current measurements
• Duty Cycle function
• Large Backlit display
• Push button Zero adjust improves DC accuracy

Measures Watts, Current, And Voltage

• Large LCD with 40 segment analog bargraph
• Data Hold, Max/Min recall, Auto Zero (DC current), plus low battery indication

High Resolution Mini Clamp With Voltage, Frequency, And Resistance

• High resolution to 10mA AC/DC
• Voltage, Resistance, and Frequency
• Fast 40 segment bargraph
• One touch Auto Zero for DC Current measurements
• Min/Max
• Data hold and Auto power off

Highest Resolution And Accuracy At Low Currents

• Low AC/DC Current measurements with high resolution to 0.1mA AC and 1mA DC
• Voltage measurements using test leads
• Fast 40 segment bargraph
• One touch Auto Zero for DC Current measurements
• Min/Max
• Data hold and Auto power off

True RMS Mini-Clamp With High Current Resolution

• True RMS measurements with 1mA AC resolution
• Non-contact Frequency measurements to 100kHz through the clamp jaws
• Fast 40 segment bargraph
• One touch Auto Zero
• Min/Max
• Data hold and Auto power off

Datalogs Up To 4000 Readings 1000A

• Clamp measures 1f or 3f (phase) power to 600kW
• Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz
• Data Hold and Auto Power Off
• 25 point memory viewable on display
• Full function display on large 4-digit LCD with fast 40 seg. bargraph, Peak Hold, MIN/MAX

Measures, Computes, and Displays 3-Phase Power on Balanced or Unbalanced Loads

• Display Lead/Lag Current/Voltage phase shift in degrees
• Store/recall last 5 readings
• DC Current Auto-Zero
• Dual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz
• Advanced Relative and Min/Max functions

Four Clamps For Power Measurements On Single Phase, 3-Phase/3-Wire or 3-Phase/4-Wire Systems

• Large backlighting LCD displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the three phases)
• Clamp-on True RMS power measurements with software for Harmonics analysis
• Current measurements to 1000A and Voltage measurements to 600V
• Automatically logs up to 20,000 sets of measurements and manually logs up to 99 sets