Direct reading of Total Chlorine Down To 0.01ppm and Is Unaffected By Color Or Turbidity Of The Sample

• Direct reading of Total Chlorine provides fast and easy measurements (less than 2 minutes)
• Low detection limit down to 0.01ppm
• Wide dynamic range of measurement up to 10ppm (use dilution method for 10 to 50ppm)
• Unaffected by sample color or turbidity
• Memory stores, tags and recalls up to 15 readings
• Unique flat surface chlorine electrode
• The state of the art LCD simultaneously displays ppm of Total Chlorine and Temperature plus analog bargraph indicator
• US EPA approved as an acceptable version of the ORION 97-70 electrode method for wastewater compliance monitoring of Total Chlorine
• Complete with meter and flat surface Chlorine electrode, 50 ExTab reagent tablets, protective sensor cap, sample cup with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap

Download Demonstration Video

Easy As 1-2-3:

• Fast and Easy ExTab reagents are a great alternative to the messy powders currently being used with color dependent meters - Simply drop a tablet into your solution, shake to dissolve the reagent faster, and then insert your meter for direct measurements

On The Spot Measurements:

• The ExStik Chlorine Meter is ideal for on the site measurements - No need to take solutions back to the lab for analysis!
• Direct readout in ppm (1ppm = 1mg/L) in less than a minute!

Lab Precision:

• The ExStik Series meters are designed with a waterproof rugged housing and flat surface electrode that can withstand harsh environments while offering lab precision accuracy no matter where you take your readings from.
• Unlike colorimeters, the unique ExStik Chlorine meter, with its revolutionary new direct measurement technique, no longer takes subjective measurements - Which means it is not effected by light, scratched vials, color or turbidity of samples.
• Extech engineers specially designed this series to eliminate virtually all error factors to give you the precise readings wherever a measurement is needed.

Specifications:

• ppm: 0.01 to 10.00ppm (10 to 50ppm using dilution method)
• Temperature: 23 to 194 Deg. F (-5 to 90 Deg. C)
• Resolution: 0.01ppm; 0.1 Deg. F/C
• Accuracy: +/-10% of reading +/-0.01ppm; +/-1.8 Deg. F/+/-1 Deg. C
• Power: Four SR44W button batteries
• Dimensions: 1.4x6.8x1.6" (35.6x172.7x40.6mm)
• Weight: 3.85oz (110g)

Download User's Manual